Hold the Ctrl Key, select both vertical centerlinesĪssign an Equal relation from the property managerĬlick on a vertical centreline and assign a length of 4.5mm, as shown in the image below: Go to: Tools > Sketch Entities > Centerlineĭraw a small vertical centerline at both endpoints of the horizontal centerline This will convert the horizontal line into a construction line as shown in the image below:
Go to: Tools > Sketch Entities > Midpoint Lineĭraw a horizontal midpoint line starting from the originĬlick on the horizontal line and assign a length of 113,5mm, as shown in the image below:Ĭlick on the fully defined horizontal midpoint line Select the Right Plane from the Feature tree and click on the sketch icon Save the file with the following name: Apple Mouse.SLDPRTĬreate a 2D Sketch on the Right Plane (Sketch 1) Open a New Part with model units set to millimeters This 3D model may not be used for any commercial, promotional, advertising or merchandising use. Disclaimer: The intellectual property depicted in this 3D model, is not affiliated with or endorsed by the original right holders.
0 kommentar(er)
